Here are guidelines for cleaning up. Pound down the lid securely.
4)Wrap plastic around light fixtures, and use masking tape to cover any hardware you can't remove.

In addition to friendly expert advice, you can find drop cloths, masking tape, caulk and more at your neighborhood paint store.
Tape off woodwork and tape down plastic drop cloths.
4)When done, allow the solids to settle out of the cleaner, then strain the liquid back into the original container for reuse.
Clean brushes, rollers and other tools with soap and water. After that, clean with a mild household detergent and a soft cloth or sponge.
Clean any spills before they dry with a paper towel dampened with mineral spirits or paint thinner. To get a great-looking finish coat and the beautiful, long-lasting results you expect, take the time to ensure that the surface to be painted is clean, dry and smooth and coated with the correct primer.

Clean-up procedures depend largely on the paint you use. Thanks to high quality coatings and applicators, even first-time painters can achieve professional-quality results.

Wait at least two weeks before washing the newly painted surface.Remove draperies, pictures, mirrors, area rugs, hardware (if possible), and switch and receptacle cover plates. Never pour paint, stain, or any other coating down a drain, into a storm sewer or anywhere else that might contaminate the environment. Do not smoke. Check with your local waste collector to see if it accepts dried latex paint.

Preparing the room before beginning your project not only makes it easier for you to paint, it also protects your home from inadvertent splatters or spills.
3)Pour the cleaning material into a clean bucket and rinse brushes and rollers well.
2)Move all furniture to the center of the room or the room, if possible. If so, place the open can in an airy spot away from children and pets. To maximize your investment on painting tools, make sure to clean them right after use.

Allow the settled solids to air-dry away from children, pets or open flames, then dispose of the container in the trash. Turn off stoves, electrical tools, appliances and any other sources of electrical ignition.
3)Seal oil/alkyd paints in the can and store them Valve Seal safely away from heat sources until you can take them to an appropriate waste-disposal site, such as community paint/stain collection events where you can safely dispose of leftover paints.

Open a window or door to ensure good ventilation. While painting and until all vapors are gone, keep the area well-ventilated. Follow manufacturer's safety recommendations when using mineral spirits.
2)Oil-based (alkyd) paint must be removed from tools with mineral spirits or paint thinner. If you do have leftovers, follow these guidelines:
And remember,also carry all the tools you'll need for surface preparation - such as ladders, wire brushes, paint scrapers, putty knives, wood filler and sparkling paste - to prepare a surface for painting.
Brushes should be kept in their original wrapper or paper-wrapped in a manner that retains their original shape before storing. Gaps between walls, ceilings, crown moldings and Valve Seal other interior trim can be filled with the appropriate caulk after priming the surface. After cleaning, flush spraying equipment with mineral spirits to prevent rusting. To keep it fresh, place a layer of plastic wrap over the mouth of the can before replacing the lid.Try to buy only the amount of paint you need so there is little to dispose of when you complete your project. Cover all furniture with drop cloths.Caution: When using oil-based coatings, keep paint away from heat, sparks and open flame.